Parts & Accessories
$10.99 - $19.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. Rim strips and valves not included.
Repair puncture-related flats in tubes easily on bicycles, lawn mowers and wheelbarrows with Slime's 7-piece tube patch kit. The kit contains everything you need to patch a tube puncture. Designed specifically for tires with inner tubes, this kit contains 5 rubber patches, a scuffer and a tube of rubber cement.
$11.99 - $15.00
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
These oversized Presta valve nuts are specifically designed to provide extra clearance and extra leverage to better tighten tubeless valves. They're especially helpful on single-wall rims. -Concave to allow better engagement of the valve/rim interface -Oversize to provide extra torque when tightening -Especially helpful on single-wall rim tubeless setups -CNC-machined AL-6061
$7.99 - $26.99
Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients
$12.99 - $66.99
Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.
$23.99 - $27.99
The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use. - Universal fit. One valve for all rim types - Replaceable grommets - Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool
- 6061 Aluminum valve and cap - Removable valve core - Comes with round & square rubber bases for different rim types - Spare alloy valve cap with integrated valve core removal tool - Installs securely with a 4mm fitting for a hex wrench on the valve and a 10mm wrench flat on the nut
The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)
Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g
Add personality to any bike with Dimension Valve Caps.
Add personality to any bike with Dimension Valve Caps.
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
$10.95 - $24.99
Continental's Revo Sealant is specifically designed for use with their Revolution tubeless-ready tires and it's great for tubular tires, too. It seals punctures and contains no protein or ammonia so it's safe for use in all wheels, too.
Tubeless Valve/Tape Kit - Includes Tape, 2 Universal Valves & 1 Valve Core Wrench
$9.00 - $12.00
Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$15.00 - $21.00
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
Whisky Parts Co. Tubeless Rim Tape.
$9.00 - $53.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
$19.00 - $25.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves
$5.95 - $23.95
- Shim adds support to Presta stem used in a Schrader rim
$6.95 - $27.95
- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions
Air-Liner GRAVEL is an insert for tubeless-ready gravel tires. Re-usable and very easy to install—as easy as mounting an inner tube on your tire—Air-Liner GRAVEL is compatible with tubeless-ready tires only and with 3-way valves (5-way valves are included for ultimate airflow). The insert can be used with sealant—preferably sealants without ammonia. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Compatible with any wheel size up to 700c with 3-way tubeless valve, and tire widths from 31mm to 40mm. - The Vittoria Air-Liner is a tire insert, designed for use in tubeless tires. - Sold individually (single tire).
The Air-Liner is a high-quality polymer insert that replaces a portion of the air volume in the tire. This trait, combined with the shape, provides a tunable system that enhances your ride performance. The Air-Liner sidesteps the traditional compromise of stability vs. grip and allows your tires to remain stable, grippy, and controlled, even at low pressures. The Air-Liner is designed using a round cross-section with channels on the top and bottom. The top channel provides room for the tunable air chamber that sits directly beneath the tire tread. Upon impact, the corner edges of the channel flex first. This allows the tread to remain flexible, which increases traction without sacrificing impact resistance. The bottom channel allows for easy fine-tuning of the air chamber and allows for full compatibility of all valve core styles. The round cross-section shape mimics the natural shape of the tire and supports a greater contact area within the sidewalls of the tire casing. Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Protection: Both wheel and tire are protected by the Air-Liner insert. By cushioning impacts from within the tire, your expensive rim remains protected while eliminating flats caused by rim-strike impacts. - Control: The Air-Liner insert replaces air volume in the tire. The reduced air volume allows the tire to compress and rebound in a more controlled manner compared to standard tubeless systems. - Performance: Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Durability: This highly durable polymer material has been tested to a projected life of 2000 hours under normal riding, or 1 full hour of run-flat downhill use under a typical rider. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Sold individually (single tire). Compatibility - Small: 1.9 – 2.25-inch wide tires - Medium: 2.25 – 2.5-inch wide tires - Large: 2.5 – 2.7-inch wide tires - X-Large: 2.7 – 4.0-inch wide tires
Don't let flats stop your ride! The legendary combination of durability, protection, and run-flat performance of Vittoria Air-Liners, made for your favorite tubeless-ready road tires! The Vittoria Air-Liner system provides unmatched bump compliance and impact protection, while ensuring bead lock at lower pressures. In the event of air-loss, the Vittoria Air-Liner Road system is designed for run-flat use. The insert increases the safety of your tubeless set-up by keeping the tire in place even in case of puncture - No risk to ride on the wheels! The Vittoria Air-Liner Road system is compatible with all tubeless road tires on the market. The lightweight material absorbs no sealant, while the proprietary Vittoria tubeless valves eliminates valve clogging. Whether you are training, touring, exploring, or racing, the Vittoria Air-Liner Road system will provide peace of mind and protection for the ride ahead. The Air-Liner Road bag contains: - One Air-Liner Road insert - Two Multiway valves Sizing recommendation: - Small, 700 x 23-26mm - Medium, 700 x 27-29mm - Large, 700 x 30-32mm
Vittoria's Mastik'One is a professional-grade tubular cement that has been trusted by the pros for decades. It provides excellent hold on both aluminum and carbon rims, and gives you the piece of mind that comes with knowing you're riding on the best. - Choose from 250-gram tin or 30-gram 12-pack - 30 grams is enough for one to two tires depending on surface area
The must-have kit for all tubeless tire users! The Tubeless Road Kit is the Vittoria all-in-one package for the best experience on your tubeless tires. The kit contains two Air-Liner Road inserts, one Universal Tubeless Tire Sealant bottle and the Road Tubeless Tool-kit - pliers and clips for easy tubeless tire removal. Contains two Air-Liner Road inserts, liquid sealant and pliers for easy tire removal. *DISPLAY BOX NOT INCLUDED THROUGH ONLINE SALE* Sizing recommendation: - Small, 700 x 23-26mm - Medium, 700 x 27-29mm - Large, 700 x 30-32mm
Page 1 of 4 Next page