Filter By:
- 24-Inch & Smaller (18)
- 26-Inch (12)
- 650B (50)
- 29-Inch (52)
- 700c, 27-Inch & 650c (70)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels

$29.99
Sta Tru Front Wheel
- Steel rim
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Rim Width (Internal): 24 mm
- Tire Type: Clincher

$1,750.00
Proven ENVE gravel wheel technology comes to the Foundation family with the AG25. Ready for high-speed adventure.
- Intended Use: Gravel, Bikepacking
- Inner rim width: 25mm
- Recommended Tire Size: 36mm – 50mm
- Tubeless Optimized; Tube Compatible
Preparation is key to a successful adventure into uncharted territories. Our experiences developing and riding the flagship G Series and M Series have created a quiver of performance enhancing features that have been incorporated into the AG25. Features like our patented Wide Hookless Bead, tuned carbon materials, external nipples and our Foundation Road Hub all come together for a gravel wheel that's more than the sum of its parts. It's ready to take an already exceptional bike to a level of even higher performance and higher fun.
Wide Hookless Bead Flat Protection
Goodbye to pinch flats: The cringe-inducing impact between rock and rim is something we've all experienced when the desire to shred trail overwhelms our better judgement. Unless you're running too much tire pressure, that impact will typically result in a pinch flatted tire.
Gravel Ride Tune
By using on board data acquisition equipment and aligning it with subjective test ride feedback, our laminate design team have refined the AG25 to deliver a ride quality that is both responsive and compliant, supportive yet forgiving.
- Shallow rim depth of 21mm allows improves vertical compliance and vibration damping
- Rim cross-section and laminate optimized for responsive power transmission and cornering stability
Built to Shrug Off Your Bad Ideas
So, you've decided to descend that mountain bike trail on your gravel rig. Or maybe you didn't have a choice, it was the only way to get from point A to point B. No worries, we encourage it. Which is why we've designed and tested the Foundation AG wheels using our proven M Series impact testing protocol. The result is a wheel that inspires confidence when you need it the most, even when you aren't looking for it.
External Molded Nipples
Reliability first, serviceability also first: By employing ENVE's patented molded spoke hole technology and configuring it for external nipples, you can rest assured that you're riding a wheel that's been built for reliability and serviceability when you need it most.
Enve Foundation Road Hub
Utilizing ENVE's core hub technologies the Foundation Road Hub delivers a high performance, maintenance-free ride experience.
- Flange spacing and hub shell geometry designed to maximize performance metrics such as wheel and drive stiffness
- ID360 40t drive mechanism delivers efficient and responsive power transmission
- Maintenance free premium full contact sealed NTN steel bearings
- Perfect Preload
USA Made, Protected for Life
It's no secret that we at ENVE are proud of our U.S. based manufacturing capabilities. Like all our rims, the Foundation Collection and its AG25 are handmade and assembled in our Ogden, Utah based, state-of-the-art carbon wheel manufacturing facility. The AG25 is covered under ENVE's Lifetime Incident Protection program and 5 Year Factory Warranty.

$897.00
Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore-is purpose—built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure.
- All-day comfort and compliant ride
- Available in 700c or 650b
- 27mm wide internal profile
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Less fatigue, which allows you to ride longer and faster
- Frustration-free tire installation
- ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement
- Lifetime Warranty

$1,002.00
Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure.
- All-day comfort and compliant ride
- Available in 700c or 650b
- 27mm wide internal profile
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Less fatigue, which allows you to ride longer and faster
- Frustration-free tire installation
- ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement
- Lifetime Warranty

$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive.
Each Wheel Includes:
- Zipp Tubeless valve extender and valve-core wrench
- Zipp rim tape (factory taped)
- Zipp Tangente quick-release skewer
- Zipp thru-axle end caps

$897.00
Zipp's 3ZERO MOTO carbon 27.5 enduro/trail wheel is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective.
While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most.
At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain.
Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride.
- Higher impact resistance
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Reduced rider fatigue
- Frustration-free tire installation
- Rim is designed for compliance, creating the feel of extra suspension
- Lifetime Warranty

$749.95
CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit.
Solid Strip & TCS Tape
- Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke.
3-Cross Lacing & Brass Nipples
- Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together.
Frequency Hub
- The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement.
Heavy-Duty Pawl Springs
- CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement.
Usage: Trail, Enduro

$849.95
CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit.
Solid Strip & TCS Tape
- Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke.
3-Cross Lacing & Brass Nipples
- Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together.
Frequency Hub
- The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement.
Heavy-Duty Pawl Springs
- CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement.
Usage: Trail, Enduro

$324.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down.
- 30mm inner rim width with 32 spokes laced in a 3-cross pattern
- 6069 aluminum alloy rim is TCS 2.0 tubeless-ready
- Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze.
- Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke.
- 6-bolt rotor mounts
- Top-tier EZO sealed bearings

$700.00
The Vuelta MTB Race 27.5 Wheelset is lightweight, reliable, and proven on the mountain and trail. Look good, feel confident, and go fast! Vuelta MTB Wheels are just the upgrade you are looking for.
- Handbuilt
- Compatibility: Shimano/SRAM 8/9/10
- Rims: Vuelta tubeless ready 23mm wide welded 6066 alloy disc only with stainless
- Spokes: Vuelta round double butted stainless steel with alloy nipples
- Lacing: Front 2 cross / Rear 3 cross (F24H x R28H)
- Hubs: Vuelta 2&1 front and rear 6-bolt disc with Japanese EZO cartridge bearings
- Axles: Front and rear quick release or thru axle kit with adaptors included
- Extras: Vuelta alloy quick release skewers, axle adaptors. rear thru axle and nylon rim strips
- Weight: Front 713g/Rear 905g = Pair 1618

$600.00
The Vuelta MTB Team V 27.5-inch Wheelset is a lightweight, reliable, and proven on the mountain and trail. Look good, feel confident, and go fast! Vuelta MTB Wheels are just the upgrade you are looking for.
- Handbuilt: 27.5-inch Alloy Mountain Wheelset
- Compatibility: Shimano/SRAM 8/9/10
- Rims: Vuelta 23mm wide sleeved 6066 alloy disc only with stainless steel eyelets
- Spokes: Vuelta round double butted stainless steel with alloy nipples
- Lacing: Front 3 cross / Rear 3 cross (F28H x R28H)
- Hubs: Vuelta 2&1 straight pull 6-bolt disc with Japanese EZO cartridge bearings (F28HxR28H)
- Axles: Front and rear quick release or thru axle kit with adaptors included
- Extras: Vuelta alloy quick release skewers, axle adaptors. rear thru axle and nylon
- Weight: Front 797g/Rear 955g = Pair 1731g

$1,099.00
Vision SC40 is the newest range of light and versatile carbon racing wheels, featuring 40mm deep rims, and disc brake hubs. They’ve been developed using extensive wind tunnel testing and on the road with professional cyclists of our sponsored teams, offering a great balance of performance and light weight at a competitive price. The full carbon rims are tubeless ready, while the alloy freehubs are compatible with Shimano 10-11 speed systems. Hand built to artisanal standards, with direct pull aero bladed spokes and ABS self-locking nipples for reliable performance and a clean rim design.
- Full Carbon 40mm depth rim
- Tubeless ready - Clincher rim (Max: 7 bar; 100 psi)
- Centerlock rotor mount
- 6 sealed cartridge bearings (2F + 4R)
- DP Spokes - 24F / 24R
- Includes rim tape (clincher) and spoke protector
- Includes adapters for (front) QR and TA-15, and (rear) QR
- Alloy Shimano 10-11sp driver

$1,549.99
Our lightweight climbing wheelset, the Capital 1.0 35 features a UD carbon fibre rim with a 35mm depth. The rim profile is a modern 21mm inner width and is tubless ready. Both wheels feature 24 spokes with a Syncros 6 pawl hub driving the cassette body. Tubeless valves are included.
- Climbing focused
- Carbon rim
- 35mm rim depth
- 21mm inner width

$4,999.99
A system for speed. Our one piece wheelset is a miracle of modern carbon fibre techniques. Hub shell, spokes and rim are molded into one piece producing one of the lightest wheels on the market with three distinct benefits - Torsional & lateral stiffness and low inertia all translating to a faster ride both in accelleration and momentum and better handling. This is the 26mm internal width version of the wheel as used by the Scott-Sram team of Nino Schurter, Kate Courtney, Lars Forster and Andri Frischknecht at the Cross Country World Cup.
KEY FEATURES
- Used by Scott-SRAM
- One piece wheel
- Super lightweight XC focused
- Tubeless Everready

$2,499.99
From 2021 SCOTT-SRAM MTB racing will ride Syncros wheels. The team of Nino Schurter, Kate Courtney, Lars Forster and Andri Frischknecht will all ride Silverton SL one piece carbon wheels at the World Cup. This year we are adding a new wider 30mm version to the teams quiver. For some time now the team riders have been riding 2.4” Maxxis tires on 30mm rims offering them lower rolling resistance and great grip at lower pressures. The new wider version of the Silverton SL offers the same great benefits of the original wheel.

$4,999.99
A system for speed. Our one piece wheelset is a miracle of modern carbon fibre techniques. Hub shell, spokes and rim are molded into one piece producing one of the lightest wheels on the market with three distinct benefits - Torsional & lateral stiffness and low inertia all translating to a faster ride both in accelleration and momentum and better handling. This is the 30mm internal width version of the wheel as used by the Scott-Sram team of Nino Schurter, Kate Courtney, Lars Forster and Andri Frischknecht at the Cross Country World Cup.
- One-piece wheel
- Super lightweight XC-focused
- Tubeless Everready

$16.99
Replacement wheels for Strider Sports balance bikes
- EVA-Polymer, no-flat, maintenance-free tire
- Fits all 12" Strider models
- Cartridge bearings
- Wheel Size: 12-inch
- Sold individually

$149.99
The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system.
- Axle: 14mm chromoly (heat-treated)
- Driver: 1-pc chromoly RHD or LHD
- Hardware: Steel(17mm wheel nuts)
- Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal
- Drilling: 36H
- Weight: 46.4-ounces

$64.99
The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim.
- Includes Stolen PVC rim strip
- Brake Compatibility: Rim Brake
- Wheel Size: 20"
- ISO Diameter: 406 / 20" BMX
- Valve: Schrader
- Tire Type: Clincher
- Axle: 3/8" chromoly (Heat-treated)
- Hardware: Steel (17mm wheel nuts)
- Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal
- Spokes: 187mm (3X) Black w/ Black Brass nipples
- Drilling: 36h only
- Weight: 32.5 oz

$149.99
The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim.
- Includes Stolen PVC rim strip
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20"
- ISO Diameter: 406 / 20" BMX
- Valve: Schrader
- Tire Type: Clincher
- Rear Axle: 14mm Threaded x 110mm
- Driver: 1-pc chromoly RHD or LHD
- Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal
- Driver Pawls: 3 Pawl
- Driver Spring: Wraparound (x1)
- Hardware: Steel (17mm wheel nuts)
- Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal
- Spokes: 183mm (3X) Black w/Black Brass nipples
- Drilling: 36h only
- Weight: 45.4 oz

$308.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$657.00
The Arch MK4 is the wheelset a lot of us here at Stan's choose to ride. All-mountain, Downcountry, Trailduro—whatever they're calling it this week, when you like pushing your limits on climbs, descents, and every kind of trail, this is your wheelset.
The Arch MK4's 28mm internal width and patented lightweight, low-profile design is not afraid to climb, while being an absolute monster on the descents. With a welded seam, reinforced spoke bed, and durable 6069 aluminum construction, the Arch MK4 rims give you the confidence to ride everything. When it comes to a consistent and reliable airtight tubeless seal, nothing beats Stan's patented Bead Socket Technology. The Arch MK4 rims feature an asymmetric design with offset spoke holes to improve spoke angle and create a stronger all-around wheel. Unlike most asymmetric rims that suffer from difficult inflation and poor tubeless performance, Stan's BST-Asymmetric design delivers all the advantages of a stronger wheel, with no compromises in tubeless performance. Nobody likes downtime, so the Arch MK4 wheelset is built with traditional J-bend spokes based on their proven strength, ride quality, and easy serviceability. Stan's has always made it easy to find replacement spokes should you ever damage your wheel, and now we've made it even easier. MK4 front and rear wheels of the same diameter all use the exact same very common spoke length, both sides, front and rear. Serviceability doesn't get any easier than that.
From the first click of the incredible M-pulse hubs, it's clear that confidence is the philosophy behind every part of this wheelset. Designed and CNC machined by Project321 in Bend, Oregon, M-pulse freehubs feature 6 pawls with Neodymium magnets that lock into place with greater force than conventional pawl springs, but offer virtually no resistance when coasting. Multiple teeth on each pawl offer better load distribution for years of trouble-free riding, and the angle of the pawls was engineered to transfer stress away from the rotating bearings, decreasing stress and wear on the entire freehub. That durability extends to the 17mm axles machined of 7075 aluminum and the full complement of Enduro brand bearings, including a double-row freehub bearing. M-pulse internals are also fully shielded inside the hub, because the only thing better than a good bearing seal is a good bearing seal most dirt can't even reach. As durable as they are, these hubs are also built for speed. M-pulse hubs engage with only 1.66°of rotation, putting down power nearly instantaneously, but how smooth these hubs roll is what really stands out. Adjustable preload allows you to fine tune M-pulse hubs for reduced friction, and less drag means more speed on the ground.The result is a bombproof hub with quick, consistent engagement and less resistance for more speed.
Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations. Tubeless ready with rim tape installed.
The Arch MK4 is our most versatile wheelset, and the best aluminum wheelset available for riders who want to push limits on every trail. Up, down, and wherever the ride takes you, the Arch MK4 wheelset has it under control.
- Arch MK4 wheels include pre-installed tape for tubeless use and presta valves.
- Versatile 28mm internal rim width optimized for 2.2-2.5” tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
- BST-Asymmetric design combines Stan’s legendary easy tubeless inflation with a stronger, more balanced wheel build
- M-pulse ultra-low drag magnetic pawl adjustable hubs with 1.66° engagement
- Enduro bearings with double-row freehub bearing
- Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability
- Connection program includes 5-year hub warranty, 3-year rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice

$308.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$833.00
- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims
- Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger
- Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel
- M-pulse hubs
- 250lb Recommended Maximum Rider Weight

$1,154.00
- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims
- Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger
- Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel
- M-pulse hubs
- 250lb Recommended Maximum Rider Weight
Page 1 of 6
Next page